IMEI Repair on Huawei Qualcomm Devices || with EMUI14 || 2024

In this guide, we will walk you through the process of repairing the IMEI on Huawei and Honor devices with Qualcomm processors running EMUI14. This procedure is provided by the DTpro team and involves a two-stage process to fix network and IMEI issues.

IMEI Repair on Huawei Qualcomm Devices || with EMUI14 || 2024

Step 1: Preparation

1.1 Write the Bootloader Image:

  • Run Qualcomm Module: Start by opening the Qualcomm Module software.
  • Brand Selection: Select "Huawei and Honor Devices" in the brand option and make sure e-Token authentication is enabled.
  • Model Selection: Choose your device model in the Xboot section.
  • Type Option: Select the "Encrypted!" type option.
  • Select DT-File: Click "Select DT-File" and load the Bootloader image file for your specific model.
  • Device Connection: Connect your device in Qualcomm Mode (EDL).
  • Write Bootloader Image: Press the Write button to write the Bootloader image file to the device.

Step 2: Write IMEIs and Turn on Phone

2.1 Enter Manufacturer Mode:

  • Open Dial Pad: On your phone, open the dial pad and type ##2846579##.
  • Navigate to Manufacturer Mode: Go to "Project Menu" > "Background Settings" > "USB Ports Settings" > "Manufacture Mode".

2.2 Driver Installation:

  • Connect to PC: Connect your phone to the PC and install the necessary drivers. If you don’t have a specific driver pack, install HiSuite and Honor Suite software.
  • Check Connection: Ensure your device is connected in Manufacturer Mode and that the drivers are installed correctly.

2.3 Qualcomm Module Setup:

  • Select Port: In the Qualcomm Module, select the DBAdapter Reserved Interface port.
  • Special Task Selection: Press Special Task and choose the IMEI repair option.
  • Input New IMEIs: Enter the new IMEI numbers when prompted and press OK.
  • Completion: Wait for the operation to finish, confirming that the IMEIs have been successfully repaired.

Repair Network:

Certain models require a network repair operation after IMEI repair due to device security or firmware version. The affected models include:

  • Huawei Nova 9 SE
  • Huawei Nova Y90
  • Huawei Nova 11i
  • Honor X7
  • Honor X8 (some firmware)
  • Honor 50 lite (some firmware)
  • Honor Magic 5 lite
  • Huawei Enjoy 60 Pro

Network Repair Procedure:

  • Select Model: In the Qualcomm Module, select your device model for network repair.
  • Repair Network: Press the Repair Network button.
  • Operation Completion: Wait for the operation to finish and restart your device.
Info.Details
Tool Name:IMEI Repair on Huawei Qualcomm Devices
Version:2024
Password:Free
File Size:?. MB
Files Hosted By:https://www.techgsmsoftwares.xyz/

Conclusion:

By following these steps, you can successfully repair the IMEI and network issues on your Huawei or Honor devices equipped with Qualcomm processors. This guide ensures that your device functions properly after encountering software problems.

Disclaimer:

This guide is for educational purposes only. Improper use of these procedures can result in permanent damage to your device. Ensure you have the necessary technical expertise before attempting these steps. Always back up your data before performing any repairs.

Download This Tool: