Redmi A3 Scatter File || For FRP and Mi Account Removal || 2024

Removing the FRP (Factory Reset Protection) and Mi account lock from your Redmi A3 can be a straightforward process with the right tools and instructions. This guide will walk you through the steps needed to remove these locks using a scatter file and the SP Flash Tool, specifically designed for MediaTek devices. You will need to download some files and follow the instructions carefully.

Redmi A3 Scatter File || For FRP and Mi Account Removal || 2024

What You Need:

  1. Redmi A3 Scatter File: This file contains the necessary information to interact with your device's memory.
  2. SP Flash Tool: A tool used to flash firmware and perform other operations on MediaTek devices.
  3. Drivers: Ensure you have the necessary drivers installed on your PC to connect your device. Without these, your PC won't recognize the Redmi A3.

Steps to Remove FRP and Mi Account Lock:

Step 1: Download the Required Files

  • Download the Redmi A3 scatter file from a reliable source.
  • Download and install the SP Flash Tool on your PC.

Step 2: Install Drivers

  • If you haven't already, install the necessary drivers for your device. This ensures that your Redmi A3 can communicate with your PC.

Step 3: Load the Scatter File

  1. Open the SP Flash Tool on your PC.
  2. Load the scatter file by selecting it within the SP Flash Tool interface.

Step 4: Enter Manual Addresses

  1. Go to the Format tab in the SP Flash Tool.

  2. Click on the manual address option.

  3. Enter the following addresses:

    • For Mi Account Removal:
      • Begin Address [HEX]: 0xc800000
      • Format Length [HEX]: 0x3000000
    • For FRP Removal:
      • Begin Address [HEX]: 0x1808000
      • Format Length [HEX]: 0x100000

Step 5: Connect Your Device

  1. Connect your Redmi A3 to the PC while it is switched off.
  2. Initiate the operation in the SP Flash Tool.

Step 6: Complete the Process

  • The operation will take a few seconds to complete.
  • Ensure you see a success message indicating that the process has finished.
Info.Details
Tool Name:Redmi A3 Scatter File
Version:2024
Password:Free
File Size:1. MB
Files Hosted By:https://www.techgsmsoftwares.xyz/

Conclusion:

By following these simple steps, you can successfully remove the FRP and Mi account locks from your Redmi A3 using the provided scatter file and SP Flash Tool. This method is effective and safe when performed correctly, ensuring that you regain full access to your device.

Disclaimer:

This guide is intended for educational purposes only. Removing FRP and Mi account locks may void your warranty or violate terms of service. Proceed at your own risk. Ensure you have a backup of your data before performing these steps, as they may result in data loss. Always download files from trusted sources to avoid malware or corrupt files.

Download This Tool: