VIVO Y17s Preloader and Scatter File || Free Download || 2024

The VIVO Y17s is a MediaTek device, and you can use a preloader file to flash and unlock your device with various tools. The provided file has been tested on many devices. Today, we have a link to download this file, allowing you to fix your device, recover from FRP (Factory Reset Protection), user lock, and flash the device.

VIVO Y17s Preloader and Scatter File || Free Download || 2024

Flashing VIVO Y17s Using SP Flash Tool:

Step 1: Download and Install MediaTek Driver Autoinstaller

  • If you already have the MediaTek driver installed on your computer, you can skip this step.
  • If not, download and install the MediaTek driver to proceed.

Step 2: Download Stock ROM

  • Download the Stock ROM (firmware) specific to your MediaTek device.
  • Extract the downloaded firmware on your computer.

Step 3: Download and Extract SP Flash Tool

  • Download the SP Flash Tool and extract it on your computer.
  • After extraction, you should see several files.

Step 4: Launch SP Flash Tool

  • Open flash_tool.exe to launch SP Flash Tool.

Step 5: Load Scatter File

  • Click on the "Scatter-Loading" button.
  • Locate and select the Scatter file from the firmware folder.
  • Click the "Open" button.

Step 6: Start Flashing Process

  • Click on the "Download" button to begin the flashing process.

Step 7: Connect Device to Computer

  • Connect your MediaTek device to the computer using a USB cable (make sure the device is powered off).
  • After connecting, press the Volume Down or Volume Up key for the tool to detect your device.

Step 8: Flashing Process

  • Once the computer detects your device, the flashing process will start automatically.

Step 9: Completion

  • A green ring will appear at the end of the flashing process.

Step 10: Success

  • Close SP Flash Tool and disconnect your device. You have successfully flashed or installed stock firmware on your MediaTek device.

Removing FRP (Factory Reset Protection) on VIVO Y17s:

Step 1: Open SP Flash Tool

  • Launch SP Flash Tool on your computer.

Step 2: Load Scatter File

  • Load the Scatter file specific to your device.

Step 3: Bypass the Authorization Requirement

  • Bypass any authorization requirements to proceed.

Step 4: Go to the Format Tab

  • Select the "Format" tab in SP Flash Tool.

Step 5: Manual Format Flash

  • Choose the "Manual Format Flash" option.

Step 6: Set Format Addresses

  • Enter the following addresses:
    • Begin Address [HEX]: 0x7508000
    • Format Length [HEX]: 0x100000

Step 7: Start Formatting

  • Click on the "Start" button to begin the formatting process.
Info.Details
Tool Name:VIVO Y17s Preloader and Scatter File
Version:2024
Password:Free
File Size:1. MB
Files Hosted By:https://www.techgsmsoftwares.xyz/

Conclusion:

Using the SP Flash Tool, you can easily flash your VIVO Y17s and remove FRP protection. This process involves installing necessary drivers, downloading firmware, and following specific steps to ensure the device is flashed or formatted correctly. The instructions provided here are designed to guide you through each step, ensuring that even those new to this process can follow along successfully.

Disclaimer:

This guide is provided for educational purposes only. Flashing or formatting your device can be risky and may void your warranty. Always back up your data before proceeding. We are not responsible for any damage that may occur to your device during this process.

Download This Tool: